Ich kann dir leider nur die AVR Dude Fuse Bits sagen:

avrdude: avr910_devcode selected: 0x5e
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e910a
avrdude: safemode: lfuse reads as CF
avrdude: safemode: hfuse reads as 99
avrdude: safemode: efuse reads as FF

avrdude: safemode: lfuse reads as CF
avrdude: safemode: hfuse reads as 99
avrdude: safemode: efuse reads as FF
avrdude: safemode: Fuses OK

avrdude done. Thank you.

Wie das bei Pony Prog genau ist kann ich dir nicht sagen!